|
| |
|
|
Stop
hackers through Internet filtering
|
|
|
|
|
|
Look 'n' Stop
filters both inbound and outbound data
between your PC and the Internet.
The Look 'n' Stop
setup includes a ready-to-use default
ruleset. It also includes an enhanced ruleset that makes
your PC less invisible to hackers.
|
|
With Look 'n' Stop,
you can select the network adapter on which Internet
filtering applies. This is very useful if you have
several network adapters on your PC.
An automatic selection is available to quickly switch
between office and home environments. |
 |
|
 |
Look 'n' Stop blocks inbound TCP connections.
It protects your from worms attacks like MSBlast, Gaobot,
or Sasser.
|
|
For advanced
users, Look 'n' Stop allows tuning filtering rules very
accurately. TCP flags (URG, ACK, PSH,
RST, SYN, FIN), fragmentation offset and fragmentation flags
can be filtered individually. The plugins
allow a even deeper control.
|
|
|
For Windows 2000 & XP, the persistent
mode lets the Internet filtering active even if Look 'n' Stop
has been closed.Look 'n' Stop is compatible with VPN
(Virtual Private Networks) software.
It can quickly be configured by importing
the VPN rules.
|
 |
Each
Internet Filtering rule can be configured to apply only
when selected software is connected.
It increases your security by blocking unused ports when
your software do not need them. |
|
Look 'n' Stop filters these IP protocols: TCP, UDP, ICMP, IGMP, 47-GRE, 50-SIPP-ESF
...
|
|
 |
Look 'n' Stop includes the Stateful Packet Inspection (SPI).
This feature greatly enhances your security. It guarantees
that data packets that do not belong to authorized and active
connections are dropped..Advanced users can tune Look 'n' Stop
rules at very low levels (down to Ethernet level) that most
personal firewalls can not address.
Look 'n' Stop filters non standard Windows protocols
(other
than MS_TCP/IP) that might be used by spyware to bypass
firewalls.
|
|
|
